Difference between revisions of "SubGigBoard"

From Kevin Darrah Wiki
Jump to: navigation, search
(Created page with "...Back to Projects: <!--300px--> 300px <!--300px--> = The Blank Mini Board = == Introduction...")
 
Line 3: Line 3:
  
 
<!--[[File:328inhand.png|300px]]-->
 
<!--[[File:328inhand.png|300px]]-->
[[File:MiniBoardEagle.png|300px]]
 
 
<!--[[File:328gerber.png|300px]]-->
 
<!--[[File:328gerber.png|300px]]-->
 +
[[File:subGigEagle.png|400px]]
  
= The Blank Mini Board =
+
= The Sub Gig Radio Board=
 
== Introduction ==
 
== Introduction ==
 
This is the Eagle Project that can be used to create your mini boards compatible with the  [[PlatformBoard | Platform Board]] or as a stackable board with any of the other mini boards like the [[BLE Board|BLE Board]] or [[328Board|328 Board]]
 
This is the Eagle Project that can be used to create your mini boards compatible with the  [[PlatformBoard | Platform Board]] or as a stackable board with any of the other mini boards like the [[BLE Board|BLE Board]] or [[328Board|328 Board]]
 +
[[File:subGigGerber.png|400px]]
  
== Download ==
+
== Schematic ==
The board and schematic files can be downloaded [http://www.kevindarrah.com/wp-content/uploads/2016/12/BlankMiniV1.zip HERE]
+
[[File:subGigSch.png|400px]]
 
 
== Tips ==
 
I use [https://cadsoft.io Eagle v7.6] (at least when these files were generated).  Create a new project, then just drag these files right into that folder.
 
Then I made this video recently showing how I hand assemble boards and where I get everything for the boards:
 
 
 
{{#evt:
 
service=youtube
 
|id=https://www.youtube.com/watch?v=qqoHTKhIBRo
 
|dimensions=560x315
 
}}
 

Revision as of 23:46, 6 February 2017

...Back to Projects:


SubGigEagle.png

The Sub Gig Radio Board

Introduction

This is the Eagle Project that can be used to create your mini boards compatible with the Platform Board or as a stackable board with any of the other mini boards like the BLE Board or 328 Board SubGigGerber.png

Schematic

SubGigSch.png