Difference between revisions of "Pusher"

Latest revision as of 13:22, 6 January 2018

NOTE!! This is a legacy page - this board is now called "trigBoard" Go to the TrigBoard page for the latest. If you need references to old revisions, please contact me HERE

@@ Line 1: / Line 1: @@
-...Back to [[Projects:]]
+* <span style="color:red">NOTE!! This is a legacy page - this board is now called "trigBoard"  Go to the [[TrigBoard]] page for the latest.  If you need references to old revisions, please contact me [http://www.kdcircuits.com HERE]</span>
-[[File:Screen Shot 2017-06-04 at 1.38.08 PM.png|600px]]
-What is IoT?
-= Version 1 =
-Very first
-== Schematic ==
-<span style="color:red">Do not use the 3V3 to power your project!</span> The active pin needs to be pulled HIGH in order to turn on that 3V3 rail from the board... this was an error in the design, so for now, the board requires an external power supply for the motor and a power supply for your control electronics (3V3/5V).
-[[File:stepperSch.png|800px]]
-== Purchase ==
-given to Patrons ...
-== Parts ==
-Parts can be downloaded [[:File:StepBoardV1.xlsx|HERE]] and uploaded into [https://www.digikey.com Digikey]
-== Assembly ==
-Coming Soon...
-== Tutorials ==
-Little refresher on how stepper motors work:
-{{#evt:
-service=youtube
-|id=https://www.youtube.com/watch?v=ePSCZ_DtF7c
-|dimensions=560x315
-}}
-Tutorial using this board:
-{{#evt:
-service=youtube
-|id=https://www.youtube.com/watch?v=d-IKDQ5vqnU
-|dimensions=560x315
-}}
- Resources:
- The sample [http://kevindarrah.com/download/arduino_code/StepBoardTest.ino CODE]