Difference between revisions of "Stepper Board"
From Kevin Darrah Wiki
(Created page with "...Back to Projects: 400px = The RTC Board = == Introduction == Based on the low cost easy to use Real Time Clock IC M...") |
|||
| Line 1: | Line 1: | ||
...Back to [[Projects:]] | ...Back to [[Projects:]] | ||
| − | [[File: | + | [[File:stepperGerber.png|400px]] |
| − | = The | + | = The Stepper Board = |
== Introduction == | == Introduction == | ||
Based on the low cost easy to use Real Time Clock IC MCP7940, this board offers a simple breakout for the part taking care of the sensitive crystal connections (probably wouldn't work very accurately on a breadboard). The 'N' version is with a battery backup, where the 'M' is not. Either part can be used.... if the N version is placed, then the board also provides a CR1220 battery holder, which should work with 12 or 12.5mm batteries. | Based on the low cost easy to use Real Time Clock IC MCP7940, this board offers a simple breakout for the part taking care of the sensitive crystal connections (probably wouldn't work very accurately on a breadboard). The 'N' version is with a battery backup, where the 'M' is not. Either part can be used.... if the N version is placed, then the board also provides a CR1220 battery holder, which should work with 12 or 12.5mm batteries. | ||
| − | [[File: | + | == Schematic == |
| + | [[File:stepperSch.png|400px]] | ||
| − | |||
| − | |||
== Purchase == | == Purchase == | ||
| − | + | given to Patrons ... | |
== Parts == | == Parts == | ||
| − | + | Coming Soon... | |
== Assembly == | == Assembly == | ||
| − | + | Coming Soon... | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== Tutorials == | == Tutorials == | ||
| − | + | Coming Soon... | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 22:15, 17 May 2017
...Back to Projects:
Contents
The Stepper Board
Introduction
Based on the low cost easy to use Real Time Clock IC MCP7940, this board offers a simple breakout for the part taking care of the sensitive crystal connections (probably wouldn't work very accurately on a breadboard). The 'N' version is with a battery backup, where the 'M' is not. Either part can be used.... if the N version is placed, then the board also provides a CR1220 battery holder, which should work with 12 or 12.5mm batteries.
Schematic
Purchase
given to Patrons ...
Parts
Coming Soon...
Assembly
Coming Soon...
Tutorials
Coming Soon...
