Difference between revisions of "RTC Board"
From Kevin Darrah Wiki
| (3 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
== Introduction == | == Introduction == | ||
Based on the low cost easy to use Real Time Clock IC MCP7940, this board offers a simple breakout for the part taking care of the sensitive crystal connections (probably wouldn't work very accurately on a breadboard). The 'N' version is with a battery backup, where the 'M' is not. Either part can be used.... if the N version is placed, then the board also provides a CR1220 battery holder, which should work with 12 or 12.5mm batteries. | Based on the low cost easy to use Real Time Clock IC MCP7940, this board offers a simple breakout for the part taking care of the sensitive crystal connections (probably wouldn't work very accurately on a breadboard). The 'N' version is with a battery backup, where the 'M' is not. Either part can be used.... if the N version is placed, then the board also provides a CR1220 battery holder, which should work with 12 or 12.5mm batteries. | ||
| + | |||
| + | [[File:rtcboardassy.png|400px]] | ||
| + | |||
== Schematic == | == Schematic == | ||
[[File:Screen Shot 2017-01-04 at 9.40.14 AM.png|600px]] | [[File:Screen Shot 2017-01-04 at 9.40.14 AM.png|600px]] | ||
| Line 15: | Line 18: | ||
== Assembly == | == Assembly == | ||
| + | |||
| + | {{#evt: | ||
| + | service=youtube | ||
| + | |id=https://www.youtube.com/watch?v=tlUzdUlY44Y | ||
| + | |dimensions=560x315 | ||
| + | }} | ||
| + | |||
== Tutorials == | == Tutorials == | ||
| − | + | ||
| + | {{#evt: | ||
| + | service=youtube | ||
| + | |id=https://www.youtube.com/watch?v=UN56GDBot3Y | ||
| + | |dimensions=560x315 | ||
| + | }} | ||
| + | |||
| + | {{#evt: | ||
| + | service=youtube | ||
| + | |id=https://www.youtube.com/watch?v=GvZCmH6BFHw | ||
| + | |dimensions=560x315 | ||
| + | }} | ||
Latest revision as of 13:27, 25 February 2017
...Back to Projects:
Contents
The RTC Board
Introduction
Based on the low cost easy to use Real Time Clock IC MCP7940, this board offers a simple breakout for the part taking care of the sensitive crystal connections (probably wouldn't work very accurately on a breadboard). The 'N' version is with a battery backup, where the 'M' is not. Either part can be used.... if the N version is placed, then the board also provides a CR1220 battery holder, which should work with 12 or 12.5mm batteries.
Schematic
Purchase
Coming soon - given to Patrons ...
Parts
The parts list can be downloaded HERE This can be directly uploaded into Digikey if you'd like.
