Difference between revisions of "RTC Board"
From Kevin Darrah Wiki
| Line 12: | Line 12: | ||
== Parts == | == Parts == | ||
| − | The parts list can be downloaded .. | + | The parts list can be downloaded [http://kevindarrah.com/download/arduino_code/RTCboardBOMv1.xlsx HERE] This can be directly uploaded into [https://www.digikey.com Digikey] if you'd like. |
== Assembly == | == Assembly == | ||
== Tutorials == | == Tutorials == | ||
Coming soon | Coming soon | ||
Revision as of 22:59, 19 January 2017
...Back to Projects:
Contents
The RTC Board
Introduction
Based on the low cost easy to use Real Time Clock IC MCP7940, this board offers a simple breakout for the part taking care of the sensitive crystal connections (probably wouldn't work very accurately on a breadboard). The 'N' version is with a battery backup, where the 'M' is not. Either part can be used.... if the N version is placed, then the board also provides a CR1220 battery holder, which should work with 12 or 12.5mm batteries.
Schematic
Purchase
Coming soon - given to Patrons ...
Parts
The parts list can be downloaded HERE This can be directly uploaded into Digikey if you'd like.
Assembly
Tutorials
Coming soon
