Difference between revisions of "BatBoard"

From Kevin Darrah Wiki
Jump to: navigation, search
 
(2 intermediate revisions by the same user not shown)
Line 11: Line 11:
 
* Uses the popular [http://ww1.microchip.com/downloads/en/DeviceDoc/20001984g.pdf MCP73831] to handle the battery charging
 
* Uses the popular [http://ww1.microchip.com/downloads/en/DeviceDoc/20001984g.pdf MCP73831] to handle the battery charging
 
* Ultra Low Iq (~2uA) Linear 3.3V Regulator [http://ww1.microchip.com/downloads/en/DeviceDoc/22008E.pdf MCP1702]
 
* Ultra Low Iq (~2uA) Linear 3.3V Regulator [http://ww1.microchip.com/downloads/en/DeviceDoc/22008E.pdf MCP1702]
 +
* Robust Micro USB connector for charging and standard JST connector for battery connection
 +
* Breaks out the USB 5V in for detection or as a separate supply, also Battery Voltage is available for fuel gauging... or again as a separate supply.
  
 
== Schematic ==
 
== Schematic ==
Line 19: Line 21:
  
 
== Parts ==
 
== Parts ==
The parts list can be downloaded "Coming Soon".  This can be directly uploaded into  [https://www.digikey.com Digikey] if you'd like.   
+
The parts list can be downloaded [http://www.kevindarrah.com/wp-content/uploads/2016/12/BatBoardV1.xlsx HERE] This can be directly uploaded into  [https://www.digikey.com Digikey] if you'd like.   
  
 
== Assembly ==
 
== Assembly ==
 
== Tutorials ==
 
== Tutorials ==
 
Coming soon
 
Coming soon

Latest revision as of 13:55, 30 December 2016

...Back to Projects:


Screen Shot 2016-12-06 at 12.14.29 AM.png

The Battery Board Board

Introduction

The battery board is a simple Lithium Battery charger and power supply. It has an ultra low power LDO (Low DropOut Regulator) to generate 3.3V from the battery input. It works nicely with the Platform Board or right into your breadboard.

  • Uses the popular MCP73831 to handle the battery charging
  • Ultra Low Iq (~2uA) Linear 3.3V Regulator MCP1702
  • Robust Micro USB connector for charging and standard JST connector for battery connection
  • Breaks out the USB 5V in for detection or as a separate supply, also Battery Voltage is available for fuel gauging... or again as a separate supply.

Schematic

BatSch.png

Purchase

Coming soon - given to Patrons Dec 2016

Parts

The parts list can be downloaded HERE This can be directly uploaded into Digikey if you'd like.

Assembly

Tutorials

Coming soon